SKU: AG-M3-500ml
EAN: 718603304073
Auto Glanz M3 - Scratch removal and "glazing" in one step!
With M3, you get a polish that can remove light to medium washing scratches and oxidation in clear lacquer/gelcoat and finish with a high-gloss finish in one simple step. The product has been developed so that it is easy to work with, without dust and easy to wipe off. Recommended for those of you who have a paint job that is reasonably nice already, but where you just want a little scratch removal and shine in one fell swoop. Or for you who don't want to go over the car several times with different products to get a nice paint job.
Matthias recommends !
Do you have a new or newer car and you have heard Matthias say; "You have to polish the car before you coat it"! Then it is the M3 that you should choose for the purpose.
M3 just makes sure to remove the individual scratches and love marks that the clearcoat may have, while also raising the gloss level to something that is really good to throw a new seal on.
M3 is also the product you choose when, perhaps 1-3 years after you have polished the car for the first time and you have gone and washed it and think: "Now it just needs a fresh ride again". It makes it easy to remove light to medium scratches and raise the shine back to a new car-like look.
User friendly
Something you don't want to bother with is dust and a polish that is difficult to wipe off. Fortunately, this is not the case with the M3. It's just super nice to work with and super easy to remove from the paint when you're done.
Disk Selection:
Use it with
Strip off the varnish with Refresh after polishing and you are ready to apply your youngster's seal!
Instructions:
- Prepare the paint for polishing. We recommend our preparation package.
- Be sure to work in the shade and on cooled panels.
- Shake the bottle thoroughly before use
- Apply 3-4 drops of H3 to the desired polishing wheel
- Spread the product on a plate section of max. 30x30 cm at low speed
- Increase the speed of the machine to 5/6 and put some pressure on the machine.
- Work in 50% overlapping movements while moving the machine at 3-4 cm per second.
- Make sure to come over the same place 4-6 times in the process.
- Wipe and inspect the area
- Repeat points 1-6 again if necessary