Auto Glanz Hyd-Re-Seal - Paint Sealant to your temper

Hyd-Re-Seal is a polymer-based sealer, which depending on how you use it - Can give you up to 6 months of effective protection of your paint. Hyd-Re-Seal comes in a concentrated formula that you dilute to your preference, depending on how you use it.

For example you can add 2 ml(!) of product to 500 ml of water and apply it all over the car via a foam lance.

You can also mix it in a trigger bottle and seal a panel at a time.

But no matter what you do, you get a well-protected and glossy paint!

Super simple - Extremely affordable.

Save time

There was a time when paint care was only something that could be applied by spendig multiple ours on it  with different waxes and paint sealers.

Today - it is different! The polymer-based sealers such as Hyd-Re-Seal that can do it "all in one" have truly found there spot in the market!

It makes it easier to apply a good and durable paint protection and to (when needed)  re-treat.

The special thing about Hyd-Re-Seal is that you receive the product in a concentrated formula. So right out of the bottle it is not "ready for use". But depending on your application wish method you can chosse how to mix it.

The obvious way to go is to dilute it in your foam lance after washing - and then distribute it over the entire car. Windows / glass and wheels included.

But you can also mix it in a trigger bottle or pump sprayer and work your way through one panel at a time.

But the absolutely wild thing about Hyd-Re-Seal is the effectiveness even when diluted. . You can dilute it completely in 1 ml of product to 500 ml of water! This makes it one of the most cost-effective paint protection products on the market.

Don't tell too many about the high dilution ratios - or we won't sell enough 😁

Gloss, protection and beading/sheeding

Hyd-Re-Seal can be used alone or can top up just about any other paint protection. And each treatment rewards you with a lot of shine, a paint where the water is hydrophobic - as well as a paint that will be significantly easier to maintain in the future.

If you use it as a spray sealer, then it's not necessary to use it after each wash.

In fact, in the summer months you will be able to reach up to 6 months durability per treatment, if used in more concentrated dilution. And if you're into beading effects, this is the way to go about it. The polymers really kick in when they are "worked" into the paint.

If you use it as a wet coat via your foam lance, in the summer you will be able to pull up to 3 months out of it - with a weekly routine wash with a pH-neutral shampoo. When used in the foam lance, you will be amazed at how much it foams during application. If you didn't know - you could mistake it for a Snow Foam.

When rinsed off by this method, the water will just as gently sheet off the paint. It will not come off lightning fast - but you will find that the water runs off more easily. Thereby leaving less to dry after your wash.

One thing is what durability is on paper/in theory. Something else is how it is used in real life.

Because it is so easy to use that we are sure you will use it more often than recommended. Primarily because you quickly get fascinated by it - and the fresh sealed look just looks great! So durability may not really matter that much because it's so easy to apply.

Highlights:

• Polymer-based paint sealer
• Gives fantastic shine
• Make your paint easier to maintain
• Can be used on all exterior surfaces
• Is easy to use
• Super concentrated - which makes it extremely cost effective!

How to Guide:

Can be used as  a wet coat og as a spray sealant depending on the dilution ration. 

Make sure the car is freshly washed. Shake the bottle well before diluting. 

As a wet-coat:

1. The first time you use it, dilute 10-30 ml of product to 500 ml of water. Second time when you need to top up - you can settle for 2-10 ml to 500 ml of water.
2. Apply the product thoroughly over the entire surface. Preferably with via a foam lance. The product here has a property of being able to foam up sharply, so you almost think it's Snow Foam.
3. Leave the product on the paint for a moment (no more than 3 minutes) and then start rinsing the product off the paint with your high-pressure cleaner. Use plenty of water!
   

As a spray sealant:

1. Dilute the product from 1:5 to 1:15 according to which look you want. The stronger the mixture, the wetter the look and durability. If the temperature is high, it is recommended to make the mixture a little thinner. In winter, you can calmly make the mixture "fat" (1:5).
2. Apply the product on a microfiber towel or applicator.
3. Then distribute the product on one panel at a time.
4. Wait for the surface to become slightly misty
5. Then wipe the surface to a high-gloss finish. We recommend you use a "fluffy" piece of microfiber for the task.