SKU: AG-H3-500ml
EAN: 718603304042
Auto Glanz H3 - Helps you get rid of severe defects in the paintwork
With H3 from Auto Glanz you get a polishing agent developed to remove scratches in clear lacquer quickly and efficiently, without dust and with very easy wiping. H3 easily removes grain 2000 sanding marks and, with the right polishing disc, can produce a really nice result on many clear coats, even in a single step. The product contains no wax, fillers or silicone. What you see is what you get!
It took us 2 years
It should be no secret that for 2 years we have helped Auto Glanz develop the H3 here. And the result has become a coarse polishing agent, which has become just as we think it should be!
- Works across different varnish types
- Can remove sanding marks
- Can remove many laundry scratches
- Finishes nicely from being a rough polish
- Does not create dust and is super easy to wipe off
Honestly, we have to admit that it is far easier to produce a good rim cleaner than to succeed in making good abrasives. But Auto Glanz has achieved this very well. So good that the products got a lot of praise along the way from both professionals and especially other suppliers of polishing agents on the market (!)
What is H3?
H3 is a hybrid product that contains both easily and hard-to-degrade abrasives. A special type of polymer helps to break down the sanding grains, at the same time as providing lubricant so that you can work with the product for a long time and thereby get a really good finish.
The product is insanely easy to use and is suitable for both the professional and the beginner.
We recommend using H3 with either:
Instructions:
- Prepare the paint for polishing. We recommend our preparation package.
- Be sure to work in the shade and on cooled panels.
- Shake the bottle thoroughly before use
- Apply 3-4 drops of H3 to the desired polishing wheel
- Spread the product on a plate section of max. 30x30 cm at low speed
- Increase the speed of the machine to 5/6 and put some pressure on the machine.
- Work in 50% overlapping movements while moving the machine at 3-4 cm per second.
- Make sure to come over the same place 4-6 times in the process.
- Wipe and inspect the area
- Repeat points 1-6 again if necessary
For an improved shine, we recommend continuing with M3 or F3 after using H3.